How Do You Change The Battery In A SmartThings Motion Sensor?
2022-07-15

If you’ve ever wondered how to change the battery in a SmartThings motion sensor, you’re in luck. This little device is easy to change the battery for, and it can last as long as two years. If your batteries are old and need a change, we can help you. 

First, remove the back cover of the sensor. The battery is on the green circuit board. Be careful not to touch it if you don’t want to compromise its functionality. 

The battery compartment is located on the back of the green circuit board. Don’t put the sensor face down on a flat surface, as it might damage it. Once you’ve removed the battery, you should press the tamper button to reset the device to factory settings.

If you want to know more about changing the battery in the SmartThings motion sensor, continue reading this article. 

What is a SmartThings Motion Sensor?

You’ve probably wondered what exactly a SmartThings motion sensor is and what it can do for your home. It’s an important piece of home automation technology, and it can help keep your family safe and secure. Not only does it detect motion, but it also monitors temperature and other environmental factors in your home. 

The Samsung SmartThings Motion Sensor has a wide range of wireless connectivity, which makes it easy to install. While it’s compatible with the HomeKit system, we found it less reliable in areas with fluctuating Wi-Fi signals. The Samsung SmartThings Motion Sensor can also work with voice assistants, and it can even be used to operate a garage door opener. 

The most impressive feature of the SmartThings system is the ability to trigger other devices and services. You can use these devices with many popular smart platforms, such as Amazon Alexa, Google Home, Apple HomeKit, Samsung SmartThings, and Nest. Smart home platforms make it easier to manage and control your home’s devices from a single app.

How Do You Change The Battery In A SmartThings Motion Sensor?

If you have a SmartThings motion sensor, you can replace the battery in just minutes. The new version of the sensor uses a coin-shaped lithium-ion battery, which is safer to handle and has longer battery life. The change is also cheaper than the older version. The length of time between battery changes depends on your usage and the connection to your SmartThings hub.

The battery located inside the Motion Sensor must be replaced after every three to five years. To do this, you will need a small tool, such as a screwdriver, to push a tab and open the battery compartment. Make sure the battery is installed correctly, as the red light will flicker once it is. Attach the top end of the Motion Sensor before removing the front cover.

To change the battery in a SmartThings Motion Sensor, you will need to remove the magnetic backing. The sensor uses a single CR-2450 battery, which typically has a capacity of between 550 and 620 mAh. Once the battery is out, you can replace it. Once you have removed the old battery, put the new one inside the motion sensor. Make sure you place the battery correctly. After that, you can close the panel and switch on the motion sensor.