All Products
-
Microwave Motion Sensor
-
Dimmable Motion Sensor
-
Presence Detectors Sensor
-
Dimmable LED Driver
-
PIR Motion Sensor
-
On Off Function Sensor
-
Sensor Driver
-
Daylight Sensor
-
DC Motion Sensor
-
UL Motion Sensor
-
DALI Motion Sensor
-
Wireless Motion Sensor
-
DALI2.0 Dimmable LED Driver
-
DALI Dimmable LED Driver
-
1-10V Dimmable LED Driver
-
Triac Dimmable LED Driver
-
LED Emergency Driver
-
IOT Driver
Contact Person :
June Zhao
Keywords [ long range motion sensor ] match 73 Products.
Supports LED Hot Swap 1-10V PUSH 25W LED Dimmer Driver Module With Short Circuit Protection
| Output Power: | 25W Max |
|---|---|
| Working Temperature: | -25℃-50℃ |
| Product Name: | Multifunction Dimmable Led Driver |
High Power LED Strip 30W Dimmable LED Driver 12v 50Hz - 60Hz for Lighting
| Output Load: | 1x30W Max |
|---|---|
| Output Current: | 250mA-700mA, Selectable Via DIP Switch |
| Efficiency: | ≥85% |
2 x 25W IP20 LED Dimmable Driver 250mA - 700mA For LED Down Light
| Rated Load: | 2x25W Max |
|---|---|
| Output Channel Qty: | Two-channel |
| Output Current: | 250mA-700mA, Selectable Via DIP Switch |
Multi - Output Current / Voltage 0-10v Dimming LED Driver SEMKO Approved
| Product Name: | Multi-function Dimmable Led Driver |
|---|---|
| Input Voltage: | 220-240Vac |
| Dimming Mode: | 1-10V, PUSH |
1-10V Dimmable LED Driver 50W PUSH 1050mA , IP20 LED Panel Light Driver
| Approvals: | SEMKO /CE |
|---|---|
| Working Temperature: | -25℃-50℃ |
| Output Current: | 350mA-1050mA, Selectable Via DIP Switch |
Constant Voltage Dimmable LED Driver 1-10V Multi Output Current , SEMKO
| Product Name: | Multifunction Dimmable Led Driver |
|---|---|
| Output Load: | 1x50W Max |
| Output Current: | 350mA-1050mA, Selectable Via DIP Switch |
Small Size MIC01-5GH01 Microwave Module With Multi - Function Extension Pins
| Operating Voltage Range: | 5-12V DC |
|---|---|
| Rated Current: | 33±3mA |
| Mode: | Motion Detected, Output TTL Control Signal |
5.8G Microwave Group Network RF Sensor, With 8m Max Mounting Height
| Operating Voltage: | 12±1Vdc |
|---|---|
| Operating Current: | <50mA |
| Mounting Height: | 3m (8m Max) |
24GHz Occupancy detector with NO contact and NC contact with AC input
| Working Voltage: | 220-240Vac 50Hz |
|---|---|
| Working Mode: | NO Contact And NC Contact |
| Mounting Height: | 2.5-4.0m |
RS-485 Protocol Surface Mounted PIR Presence Detector With 4m Mounting Height
| Input Voltage: | 12-24Vdc |
|---|---|
| Working Current: | 20mA MAX. |
| Power Consumption: | ≤0.5W |