On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control

Place of Origin China
Brand Name Merrytek
Certification CE
Model Number MSA017K IR
Minimum Order Quantity 100pcs
Price Negotiation
Packaging Details White box+ White box tags+ Clapboard+ Carton(K=A)
Delivery Time 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Payment Terms T/T
Supply Ability 10,000pcs per month

Contact me for free samples and coupons.

Whatsapp:0086 18588475571

Wechat: 0086 18588475571

Skype: sales10@aixton.com

If you have any concern, we provide 24-hour online help.

x
Product Details
Input Voltage 21-30Vdc ( KNX BUS Power) Working Current 10mA MAX.
Power Consumption ≤0.5W Function PIR Motion Detection + Daylight Sensor
Detecting Area (radius) 2.5-4m Mounting Height 2-6m
Installation Flush-mounted Cut Size Φ60mm
Leave a Message
Product Description

On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control

 

 

1. Features

1) PIR motion detection
2) KNX bus power and KNX communication available
3) Daylight sensor detection is available
4) Detection area, and hold time can be set by remote or ETS
5) Max detection range: 2.5-8m in diameter
6) Warehouse, workshop, and lobby motion detection is highly recommended

7) Flush mounting or surface mounting optional

 

 

2. Parameters

Input/Output Input voltage 21-30V DC KNX bus power
KNX current ≤10mA
Consumption ≤0.5W @24V DC
Sensor parameter Function PIR motion detection+ daylight sensor
Detection Area ETS setting:8%/16%/24%/32%/40%/48%/56%/64%/72%/80%/88%/100%
Hold Time ETS setting
Radius detection range(based on 100% sensitivity) 2.5-4m @25℃ based on 3m mounting height
Remote control Available
Mounting height 2-6m typical value:3m
Application environment Drill hole Φ60mm
Working temperature -25℃...+50℃(detection range might differ based on different temperature )
Storage temperature -40℃~+80℃
Warranty 3 years(available based on product quality problem)
Certificate Standard Certificate Compliant to CE
Environmental requirements Compliant to RoHS
IP rating IP20
“N/A” means not available

3. Dimension

On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control 0

On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control 1

4. Wiring Diagram

 

On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control 2

 

Wiring recommendations:

1. KNX bus wiring suggestion hand in hand to the end, star, or tree wiring is not recommended to ensure the stability of signal transmission.

 

2. KNX bus wiring wire recommends KNX standard EIB shielded wire or Category 6 network cable, the length of the bus wiring is recommended not to exceed 400 meters, and the number of sensor connected to a bus is recommended to not exceed 12.

 

3. The number of sensors connected to a bus needs to fully consider the current load capacity of the power supply: that is the sum of the currents of all KNX devices (including sensors) shall not be greater than the load current of the KNX power supply.

 

 

5Start Process & Initialization

After routing the physical addresses and setting the channel parameters, follow these steps:

(1) Connect Bus interface;

(2) Set Bus and auxiliary power on (note: please make sure that product has auxiliary power supply, otherwise the device may not work properly);

(3) Press the programming switch of the product, the LED light will turn red;

(4) Use the bus interface to download the physical address through the ETS software. The programming LED light is off to indicate that the physical address download is successfully completed;

(5) Download the application after setting the required application parameters.

(6) After downloading the application, the product goes into initialization. During initialization, the detection function is disabled. After 20S, the initialization is completed, and the product works normally;

Note: Please use the latest version of ETS 5 or 5.7.2 version. Please obtain thee ETS engineering configuration file of this sensor from our sales staff.

 

 

6. Detection radiation

On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control 3

7. Detection Signal

The product detects human moving signals and below is a description of the moving signals:

Moving signal: detect the human significant moving (walking) in the detection area.

 

 

8. Remote Control (MH10)

On-demand lighting control KNX motion detectors pir movement sensor switch for smart building control 4