All Products
-
Microwave Motion Sensor
-
Dimmable Motion Sensor
-
Presence Detectors Sensor
-
Dimmable LED Driver
-
PIR Motion Sensor
-
On Off Function Sensor
-
Sensor Driver
-
Daylight Sensor
-
DC Motion Sensor
-
UL Motion Sensor
-
DALI Motion Sensor
-
Wireless Motion Sensor
-
DALI2.0 Dimmable LED Driver
-
DALI Dimmable LED Driver
-
1-10V Dimmable LED Driver
-
Triac Dimmable LED Driver
-
LED Emergency Driver
-
IOT Driver
Contact Person :
June Zhao
Keywords [ light motion sensor ] match 280 products.
IP65 Waterproof Microwave Motion Sensor ON / OFF Function For LED Batten
| Operating Voltage Rage: | 108-305VAC 50/60Hz |
|---|---|
| Working Mode: | ON/OFF |
| Transmitting Power: | 0.5mW Max. |
Higbay Application 15m Mouting Height DC Motion Sensor With Zhaga Book 18 Connector
| Rated Voltage: | 11-13VDC |
|---|---|
| Output Signal: | 0 -10VDC Dimming Signal |
| Working Frequency: | 5.8GHz ±75MHz, ISM Band |
50Lux Daylight Priority DC Motion Sensor MC002D 10
| Input Voltage: | 12±1V DC |
|---|---|
| Rated Voltage: | 12±0.6V DC |
| Stand-by Power: | ≤0.5W |
MC002D 6 Microwave Motion Sensor Daylight Sensor Low Impedance Dimming / On Off Function
| Rated Voltage: | 12±1V DC |
|---|---|
| Working Frequency: | 5.8GHz±75MHz, ISM Band |
| Working Current: | 15±2mA |
UL Approved 120V / 277V / 347Vac input Automatic Dimming Motion Sensor
| Rated Voltage: | 120/277/347VAC 50/60Hz |
|---|---|
| Stand-by Power: | ≤1W |
| Operating Temperature: | -35℃~70℃ |
UL Approved 1-10v Dimmable Controls Motion Sensor With Dimmable Function
| Rated Voltage: | 120/277VAC 50/60Hz |
|---|---|
| Stand-by Power: | ≤0.5W |
| Output Dimming Mode: | 0-10VDC Dimming Signal / ON/OFF Signal |
Ceiling Mounted Wireless Motion Sensor MC003V/ CP + MW01 1200W with ISM Wave Band
| Product Name: | MC003V/CP+ MW01 |
|---|---|
| Operating Voltage: | 220~240Vac,50/60HZ(MC003V/CP) 12VDC(MW01) |
| Detection: | Max(D×H):16m×10m(MC003V/CP) |
Surface Mounted Microwave Motion Sensor For Warehouse 12m Mounting Height 30m Detecting Range
| Rated Voltage: | 220-240Vac |
|---|---|
| Working Mode: | On/off |
| Hold Time: | 5S/30S/1Min/3Min/5Min/10Min/20Min/30Min |
IP20 Flush Mounted Standalone Microwave Motion Sensor to use in commercial building corridor
| Operating Voltage: | 198-264V AC 50Hz/60Hz |
|---|---|
| Rated Voltage: | 220-240V AC 50Hz/60Hz |
| Stand-by Power: | ≤0.5W |
12 - 24V DC Independent Flush Mount MSA001D Merrytek Motion Sensor
| Rated Voltage: | 12-24V DC |
|---|---|
| Operating Frequency: | 5.8 GHz ±75 MHz，ISM Band |
| Hold Time: | 5S/1Min/5Min/10Min |