Send Message
products

MC083S RC High Installation On Off Function Sensor DIP Switch Remote Control

Basic Information
Place of Origin: China
Brand Name: Merrytek
Certification: CE & FCC
Model Number: MC083S RC
Minimum Order Quantity: 100pcs
Price: Negotiable
Packaging Details: Packed in bubble bags firstly, and then reinforced with carton for outer packing
Delivery Time: 1, Sample and small order: Within 5 working days 2, Bulk order: within 3-4 weeks
Payment Terms: T/T
Supply Ability: 10,000pcs per Month
Detail Information
Product Name: ON/ OFF Function Sensor Operating Voltage: 120-277V AC 50/60Hz
Rated Load: 3A@120V AC, 2A@277V AC Working Frequency: 5.8GHz ±75MHz, ISM Band
Approval: CE & FCC Set Parameter: Dip Switch And Remote Control
IP Rating: IP20 Detecting Radius: ≥3m(mounting Height 10m Typically, 12m Maximum)
High Light:

IP20 On Off Function Sensor

,

DIP Switch On Off Function Sensor

,

ISM band Motion Sensor


Product Description

 
Pls refer to the following spec sheet of this ON/OFF sensor
 
MC083S RC spec 2023.07.10.pdf
 
1. Features
 

 High installation, can support 12m mounting

 users can configure each sense parameter according to needs.

 Support high-sensitivity and low-sensitivity mode (for metal ceiling, metal reflective surface installation environment)

 Override function

 5 years warranty
 
2. Parameter

InputOperating Voltage108-305V AC 50/60Hz
Rated Voltage120/277V AC 50/60Hz
Stand-by Power≤1W
Surge TestL--N: 1kV
OutputWorking ModeON/OFF function
Type of LoadInductive or resistive Load
Load Capacity2A @120Vac ,3A@277Vac, 3A@220-240Vac
Max. Surge Capacity

30A (50%Ipeak,twidth =500uS, 230Vac full load, cold start);
60A (50% Ipeak, twidth=200uS, 230Vac, full load, cold start)

Sensor ParametersOperating Frequency5.8 GHz ±75 MHz, ISM Band.
Transmitting power0.5mW Max.
Hold time5S/30S/1min/3min/20min/30min
Detection Area100%/75%/50%/10%
Daylight Sensor5Lux/15Lux/30Lux/50Lux/100Lux/150Lux/Disable(Ambient light diffusion)
Detecting RadiusSee detection pattern
Mounting Height12m Max
Detecting Angle150°

Operating

Environment

Operating Temperature-25℃…+60℃
Storage Temperature

Temperature:-40℃…+80℃;
Humidity:10%-95% (non-condensing)

Certificate StandardsSafety standardsEN61058-1, UL60703-1
EMC standardsEN300440; EN301489-1; EN55015; EN61547; EN61000-3-2; EN61000-3-3; EN62479
Environmental RequirementCompliant to RoHS

 

Certificate StandardsCertificateCE, RED,UL,FCC
OthersInput/output terminal specificationsPush-type terminal block; wire diameter: 0.75-1.5mm2
IP RatingIP20
Protection ClassClass II
InstallationBuilt-in installation
Dimension93.5*45*28.5mm
PackageBubble bag + partition + outer box (K=A)
Net Weight61.2g
Lifetime5 years warranty @Ta 230V full load

Note
1. “N/A”means not available.
2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height person and walking speed is 0.5m/s.

 
Certificate StandardsCertificateCE, RED,UL,FCC
OthersInput/output terminal specificationsPush-type terminal block; wire diameter: 0.75-1.5mm2
 IP RatingIP20
 Protection ClassClass II
 InstallationBuilt-in installation
 Dimension93.5*45*28.5mm
 PackageBubble bag + partition + outer box (K=A)
 Net Weight61.2g
 Lifetime5 years warranty @Ta 230V full load

Note
1. “N/A”means not available.
2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height person and walking speed is 0.5m/s.

 
3. Function
 

On/OFF Function

 

MC083S RC High Installation On Off Function Sensor DIP Switch Remote Control 0
 
4. Dimension (mm)
  MC083S RC High Installation On Off Function Sensor DIP Switch Remote Control 1
 

 
5. Wiring
 
MC083S RC High Installation On Off Function Sensor DIP Switch Remote Control 2

 

 

*The sensor is designed to connect one load only. Connect more than one load may damage the sensor.
6. Function Diagram

 
MC083S RC High Installation On Off Function Sensor DIP Switch Remote Control 3
7. Application Notice

1)The product can work with any kinds of control grear..

2) The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switch.

3) The sensor mounted in a plastic, glass lampshade would reduce the sensitivity of the sensor. For every 3 mm increase in thickness, the sensitivity would reduce by 20%.

4) The sensing distance will be affected by the height of the sensor installation, the size of the object being detected, and the speed of movement.

5) Daylight the value is in a sunny environment with no shadows and ambient light diffuse reflection conditions. The values illumination detected by sensor may vary in different environment, at different times, in different seasons, and in different climates.

6) The parameters of the sensor may need to be reconfigured in different installation environments. Please refer to the following instructions or contact the manufacturer.

7) This sensor is for indoor use only. Outdoor use will affect the waterproof effect, wind and moving objects around would cause false triggering.

8) The distance between any inductive sensors should be greater than 3m.

9) When the sensor is installed in a metal illuminance , a metal reflective surface, or a narrow enclosed environment, the microwave will be reflected repeatedly and cause false triggering. Please reduce the sensitivity or contact the manufacturer for technical support.

10) Do not place the sensor close to high-density objects such as metal, glass, mixed-use walls, etc. The sensor may be triggered by mistake.

11) Please ensure that there are no moving signals around the sensor, such as fan, DC motor, sewer, air outlet, etc., the sensor may generate false triggers.
 
 
 
 
 

 

 

 

Contact Details
june zhao

Phone Number : +8613510457702