Send Message

25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving

Basic Information
Place of Origin: China
Brand Name: Merrytek
Certification: SEMKO / CE/ RoHS
Model Number: ML25C-PV
Minimum Order Quantity: Stop production, not available.
Price: Negotiation
Packaging Details: Packed in bubble bag firstly, and then reinforced with carton for outer packing
Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Payment Terms: T/T or Western Union or PayPal
Detail Information
Product Name: 25W Dimming LED Power Supply Output Load: 1 X 25W Max.
Stand-by Power: ≤0.5W Output Voltage: 68Vdc Max.
Input Voltage: 220~240Vac Dimming Mode: 1-10V, PUSH
Working Temperature: -25℃-50℃ Isolation Class: Class Ⅱ
Approvals: SEMKO/ CE/ RoHS Protection Class: IP20
High Light:

led light driver


700ma dimmable led driver


Non Flickering Dimming LED Power Supply

Product Description

25W non flickering 1-10V / PUSH dimming LED power supply Energy saving



1, 5-year warranty

2, Dim via a potentiometer

3, Stand-by power below 0.5W

4, Primary dimming with PUSH Button

5, Secondary dimming with 1-10V dimmer

6, Flicker-free for whole dimming range

7, Support Master-Slave grouping net-working

8, Dimming level memory at mains restores

9, Derating current for over high ambient temperature

10, Protection: Short circuit/ Over temperature/ Over voltage

11, Maximum length of the cable, from push button to last driver is 20m








Input voltage 220-240Vac
Input frequency 50-60Hz
Input current 0.14A max
Power factor (Note 1) ≥0.90
Efficiency(Note1) ≥80%
Stand-by power (Note 2) ≤0.5W






Output current/ voltage

250mA 6~58Vdc 14.5W max; 350mA 6~58Vdc 20W max

500mA 6~50Vdc 25W max; 700mA 6~36Vdc 25W max

Output load range 25.2W Max.
Current accuracy ±5%
Dimming mode 1-10V, PUSH





Working temp.(Ta) -20~50℃
Surface temp.(Tc) 85℃max
Working humidity 20~85%RH non-condensing
Storage temp. -40~80℃
Life time ≥50000hours




Isolation class Class Ⅱ, SELV
Protection class IP20
Over voltage 300Vac, 2H
Short circuit Protection type; auto reset
No-load Protection type; auto reset
Over temperature Protection type; auto reset






Safety EN61347-1 EN61347-2-13
EMC EN55015, EN61000-3-2
EN61000-3-3, EN61547
Approvals SEMKO, CE, RoHS
Withstand voltage IN-OUT:3.75KVAC/5mA/1min
Dimension (L x W x H) 150x52x28mm

Press-in type terminals, 0.75-1.5mm2

Input: L,L,N,N,PUSH,PUSH,Sync,Sync

Output: SEC(+) SEC(-), 1-10V(+),1-10V(-)




1, Power factor and efficiency is detected at 230Vac input and full load.

2, Standby power is detected at 230Vac input and switch off led load by push button.


Mechanical Specification:



Dimming Operation:

1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (>1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2.1-10V dimming (see wiring diagram, Fig C)

The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C



Wring Diagram:




25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving 0






25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving 1





25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving 2





Contact Details
june zhao

Phone Number : +8613510457702